Start with the obvious checks
Before assuming your MyLifter motor has failed, confirm the basics: is the power adapter plugged in securely? Is the DC power cable undamaged and fully inserted at both ends? A loose connection or a tripped breaker can mimic a motor failure. Also verify that the remote or wall switch has fresh batteries and is within range.
Listen and look for motor symptoms
If the motor receives power but does not move, listen for a faint hum. A hum with no movement may indicate a stuck internal component or a seized bearing. No sound at all suggests an electrical issue—either a break in the motor winding or a failed control board. Neither is user-serviceable without specialized tools and replacement parts.
What the DIY limits are
The MyLifter motor is a sealed unit. There are no user-replaceable brushes, fuses, or reset buttons accessible from the outside. Opening the motor housing voids any warranty and risks electrical shock or damage to precision gears. The practical DIY scope ends at verifying power delivery and checking for obvious physical obstructions in the lifter track or pulley system.
When to use the official MyLifter Motor Service
- MyLifter Motor Service: Repair cost is $100 per motor, which includes the repair, all needed replacement parts, and quality testing. For $100 you get a professional diagnosis, replacement of any worn internal parts, and a quality test—often cheaper than buying a new motor and safer than attempting a DIY repair on a sealed unit.

MyLifter Motor Service - MyLifter Motor Service: You are responsible for shipping the motor to Garage Smart; they cover return shipping. Your only out-of-pocket cost beyond the $100 repair fee is one-way shipping. This keeps the total expense predictable.
- MyLifter Motor Service: Send only the MyLifter motor(s). Do not include power cables, pins, pulleys, power adapters, or other accessories. Extra parts can get lost or delay the repair. Packing only the motor streamlines the process and protects your accessories.
How to pack and ship your MyLifter motor for service
Once you have decided to use the MyLifter Motor Service, follow these steps to ensure the motor arrives safely and the repair proceeds quickly.
- Remove only the motor: Disconnect the motor from the lifter assembly. Keep power cables, pins, pulleys, and the power adapter with your lifter—they are not needed for the repair.
- Pack the motor securely: Wrap the motor in bubble wrap or other protective padding. Place it inside a sturdy shipping box with enough cushioning to prevent movement during transit.
- Ship to the correct address: Garage Smart Repair, 1200 Towne Centre Boulevard, Unit 2002, Provo, UT 84601.
- Make payment: Payment is required before the repair begins. You will receive instructions after the motor is received or upon contacting support.
What happens after you ship the motor
Once the motor arrives at Garage Smart, a technician completes the repair, performs thorough quality testing, and ships the repaired motor back to you at no additional shipping cost. The entire process covers the repair, all needed replacement parts, and quality testing—so you receive a motor that is ready to reinstall.
When to skip DIY and send the motor in
If your motor shows no signs of life after confirming power and connections, or if it hums but does not turn, the internal issue is almost certainly beyond DIY repair. The $100 service fee is a straightforward alternative to buying a replacement motor. For any questions before shipping, contact Garage Smart at [email protected].

